Close

X200 Expansion Board Extend Board for Raspberry Pi 3/2 Model B/B+

EZ-0002

New

999 Items

$ 49.99

Add to wishlist

More info

X200 Expansion Board 

 

x200_860p5

Key Features:

 

Input Voltage - 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
VGA output - HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC 
Audio - 3.5mm MIC in jack 
 - 3.5mm stereo audio jack
 - SPDIF output
 - Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
Wireless - WiFi (IEEE 802.11b/g/n) with external antenna 
 - IR sensor (38KHz)
USB Storage - Self-powered USB hub with 3 ports
Real-time clock (RTC) -  Based on DS3231SN with included CR2032 battery
GPIO Control - 8-channel Darlington driver chip  (ULN2803) allowing to control electronic circuits which require more
 current
Misc - Power output socket 
 - Headers to access camera connector on top of the Raspberry Pi
 - DIP switch to remove connection from RPi’s pin header
 - Directly connected on top of the Raspberry Pi using the board GPIO header pins 
 - No wiring nor soldering is required 
 - Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
Dimensions - 85 x 56mm (Same size as Raspberry Pi)

    

Packing List:

  • 1 x X200 expansion board
  • 1 x HDMI adapter
  • 1 x USB adapter
  • 1 x 2.4GHz WIFI antenna
  • 4 x nylon spacers (M3 x 20mm)
  • 8 x nylon screws  (M3 x 6mm)

 

Quick Start:

  • A. Fitting the expansion board
  • B. Download and install the pre-builtimage-Optional
  • C. Power supply
  • D. HDMI to VGA converter
  • E. Microphone input and audio output
  • F. Audio input and output interface
  • G. Setting RTC time
  • H. Setting up the IR remote
  • I. ULN2803 8-channel RC servo port  

Technology Support:

  • http://wiki.52pi.com/index.php/X200_SKU:_EZ-0002
 

 

How to Fit the expansion board:

  • 1. Push a screws up through the mounting hole on the underside of the Raspberry Pi and screw the spacer down until it is hand tight
  • 2. Plugs the expansion board straight into your Raspberry Pi B+'s GPIO header and  screw  down
  • 3. Insert the HDMI adapter
  • 4. Insert the USB adapter
  • 5. Install the WiFi antenna

 

Reviews

No customer reviews for the moment.

Write a review

X200 Expansion Board Extend Board for Raspberry Pi 3/2 Model B/B+

X200 Expansion Board Extend Board for Raspberry Pi 3/2 Model B/B+

30 other products in the same category

Close