What is Banana Pi M2 Berry
Banana Pi BPI-M2 Berry is a quad-core mini single board computer built with Allwinner V40 SoC. It features 1GB of RAM . It also has onboard WiFi and BT. On the ports side, the BPI-M2 Berry has 4 USB A 2.0 ports, 1 USB OTG port, 1 HDMI port, 1 audio jack, a DC power port, and last but not least, a SATA port.. Also being a member of the Banana Pi family, the M2 Berry is a direct upgrade from the Banana Pi M1/M1+ that support SATA from the SoC. The SATA performance on the V40 is fitting for media related projects such as storage servers. Backed by our community, starting a project and building servers is fun and rewarding. We welcome all companies, DIYers, and tech loving people within our community! Together, we can make a difference, we can discover our passions, inspire others, and build a practical project.
Quad Core ARM Cortex A7 CPU V40.
1GB DDR3 SDRAM.
WiFi (AP6212) & Bluetooth onboard.
CPU: quad-core cortex -A7 V40
GPU: MALI-400 MP2 @ 500MHz
Memory:1GB DDR3 SDRAM (shared with GPU)
Storage Support：MicroSD Card(up to 64GB)/SATA
Onboard Network:10/100/1000Mbps ethernet (Realtek RTL8211E/D)
WiFi:802.11 b/g/n (AP6212)
Video In:CSI connector that supports 8-bit YUV422 CMOS sensor CSI, CCIR656 protocol for NTSC and PAL, 5MP camera, 1080p video @30Hz
HDMI 1.4 1080P60
MIPI DSI for RAW LCD panels
Audio Out:3.5 mm Jack and HDMI
Audio In:On board microphone
Power Source:5V 2A Micro USB
USB Ports:4x USB 2.0, USB OTG(Micro USB)
Buttons:Reset button, Power button, U-boot button
GPIO:40 Pins: GPIO, UART, I2C bus, I2S bus, SPI bus, PWN, +3.3v, +5v, ground
LED:Power status Led and RJ45 Led
IR:Onboard IR receiver
OS:Android and Linux etc.OS
Dimensions:92mm x 60mm