5 Inch 800x480 Capacitive Touch Screen
The 5 inch 800x480 capacitive touch screen has been tested on Raspberry Pi,BeagleBone Black,Windows 10 and MacBook Pro.
Due to the built-in EDID information, it’s easy to identify the touch screen. It’s Plug and Play.No Driver Needed! All you need to do is to adjust the resolution on Raspberry Pi.
It supports Multi-touch(maximum 10 points ,only test on Windows 10).
When you use this display with a Raspberry Pi, please edit config.txt to set the HDMI to the native 800x480 in case it doesn't detect the resolution properly. The easiest way to edit the config.txt is to put the Pi TF card into an every day computer, and edit config.txt with any text editor and save.
Resolution up to 800 x 480
USB Capacitive touch control
Free-driver, Plug and Play
Supports Raspbian, Ubuntu Mate, NOOBS with RaspberryPi
Supports Debian, Angstrom with BeagleBone
Supports Windows / Ubuntu / Mac with PC
Supports Intel-Processor Base MiniPC
ULP (Ultra Low Power) consumption backlight
Power: 5V Power via USB Micro
Current: Max 400mA
Display Type: 5 inch TFT LCD
Touchscreen: USB capacity
Touch points: 10 points maximum
Interface: HDMI & USB 2.0 Full Speed
Dimensions: 133mm x 79mm x 13mm
Weight without package: 130g
Weight with package: 180g
1x 5 inch Capacitive Touch Screen
Pls follow our wiki to adjust the resolution of the touch screen on Raspberry Pi!